510001 2400 PSI 2.0 GPM PUMP KIT WITH ROUND BASE MULTI POSITION MOUNTING

510001 Replacement pressure washer pump kit is an oil filled, direct drive axial cam pump with a round base multi position mounting used in various pressure washer applications.

The 510001 Direct Drive Axial Cam pump is rated up to 2.0 GPM at 2400 PSI with a 7HP engine. 

The 510001 Pump Kit includes the garden hose inlet fitting, inlet filter screen, M22 outlet fitting, thermal relief valve and chemical filter

510001 Direct Drive Vertical Axial Replacement Pump will fit many brands & models of pressure washers up to 2400 PSI with 7HP Engine.

The 7/8" Shaft & SAE Gas Engine Flange with multiple bolt pattern produces up to 2 GPM and is suitable for most homeowner pressure washer units.

Thermal Relief Protection helps to prevents the pump from overheating

Total Maximum height is 6 1/2 Inches

Fully Black Anodized Die-Cast Aluminum Crankcase to help protects against corrosion from harsh water conditions.

We still always recommend the use of pump protector after each use of your pressure washer.

This pump comes pre-filled with oil & sealed for simple installation on your existing pressure washer.

This oil lubricated, round base, multi position pump comes with the High Performance Double Seal System to help prevents water leaks.
Dual Oversize Radial Ball Bearings & Polished Stainless Steel Pistons for better wear and longer pump life.
Threaded Industry Standard M22 Pump Outlet with a built in Integrated Unloader and EZ Start system.

Note: If you are looking for a replacement 3 legged pump you will be looking for one of the following 3 Legged pumps.
If the Inlet and Outlet tubes on your current pump face the same direction as the spark plug of the engine on the pressure washer you will need to order SRMW2.2G26-EZ and if the Inlet and Outlet Tubes face the opposite direction as the spark plug of the engine you will need to order the SRMW2.2G26-EZSX.