J7907 IHP Ignition Control Board Proflame 2

In stock
Part Number
J7907
$220.38
Part Number: J7907
Shipping Weight: 1 Lbs
Non Returnable
I understand this item CAN NOT be returned if the tamper evident packaging has been opened. Packaging is see-through to allow for proper inspection prior to unwrapping.
⇧ Check The Box If You Want To Proceed.

The J7907, or 0.584.608, Proflame 2 SIT Integrated Fireplace Control board is a device that allows the automatic ignition and pilot flame supervision, to command the functions of a hearth appliance.


This J7907 Proflame 2 IFC board has the ability to control the comfort fan through 6 speeds, switch on or off an auxiliary output via the remote transmitter, and modulate an accent light through 6 levels. 


The SIT Integrated Fireplace Control board, or IFC, directly controls the pilot assembly and an automatic SIT Gas Control 880, 886, and 885 service valves of the Proflame families using low voltage electric current and is powered by line voltage (AC) with provision of battery

back up in case of the main loss of power. It is important to note that the fans and lighting features will not function when the IFC is powered by only the battery backup.


This SIT IFC board is configured to control the ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous pilot ignition) modes.


This Sit Controls J7907/0584608 control module has the following specifications:

J7907 Proflame Complete (w/Power Vent) with 10sec FFRT plus Pilot On Demand (Pilot shut off after 7-days of inactivity in CPI mode)

AC supply voltage and frequency 120V~60Hz max. 2.5A

Battery supply voltage 6V

Ambient Operating Temperature 14÷176°F (-10÷80°C)

Radio frequency remote control 315 MHz

Light dimming output 120V~60Hz max. 0.5A (res.)

Comfort fan output 120V~60Hz max. 2A (0.5pf)

Burner fan output 120V~60Hz max. 5A (0.5pf)

Spark voltage >10kV over 5mm spark gap

Spark energy >0,7mJ

Spark frequency 1Hz

Pilot ignition source Intermittent/Continuous

Flame Failure Response time 10 s

Waiting time 2 s

ATMO / FAN Pre-purge time 2 s / 15 s

ATMO / FAN Post-purge time 2 s / 120 s

Inter-ignition time 30 s

Safety time 60 s

Number of trial for ignition 2

Comfort fan startup delay 5 min

Comfort fan shut off delay 12 min

Recycle Time 30 s

This control module measures approximately 6 1/4 x 3 1/2 x 1 5/8 inches



Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
N/A
N/A