2025 © Allparts Equipment & Accessories. All Rights Reserved.
0.584.044 Proflame 2 Series Remote Transmitter Wall Mounted PF2CSA GTMFSLA
The 0.584.044 is an SIT Controls Proflame 2 wall mounted remote-control GTMFSLA Transmitter. This 0.584.044 transmitter is compatible with both direct vent and vent free appliances, including fireplaces and gas log sets.
This SIT Proflame remote control transmitter was used on many direct vent gas fireplaces and stoves and has the ability to control several features. Transmitter 0.584.044 was also specifically capable of controlling a fire feature accessory.
Specifications of the 0.584.044 SIT Transmitter
- AC Supply Voltage: 120 V ~ 60 Hz, Max 2.5 A
- Ambient Operating Temperature: 14° - 176°F
- Auxiliary Output Voltage: 120 V ~ 60 Hz, Max 5 A
- Fan Speed Output Voltage: 120 V ~ 60 Hz, Max 2 A
- Light Dimming Output Voltage: 120 V ~ 60 Hz/ 0.5 A
- Radio Frequency: 315 MHz
- Gas Type: Tested with Natural Gas and Liquid Propane Gas
Programing Information
You can program this remote to your existing fireplace or stove with a simple programming feature on your current receiver.
Push the program button one time on your receiver and you should hear the 3 short beep telling you the receiver is now ready to accept a new code from the remote transmitter.
Now push the On/Off button of your remote transmitter and you should hear 4 beeps from the receiver telling you the receiver and the remote are now paired with the same RF code and ready to be used.
If after you have performed this procedure you are still not able to control your gas log set remotely then the most common failure part is the receiver.