SP745 robert shaw replacement module front view
SP745 robert shaw replacement module front view ROBERTSHAW REPLACEMENT MODULE SP745 robert shaw replacement module bottom view

SP745 ROBERTSHAW REPLACEMENT MODULE

In stock
Part Number
SP745
$179.88
Part Number: SP745
Shipping Weight: 2 Lbs
Non Returnable
Click here to agree to Allpart's Return Policy.
Please see our return policy
⇧ Check The Box If You Want To Proceed.
The SP745 Robertshaw Ignition control module has been replaced with the Robertshaw SP845 control module series number 780-845.

The Complete factory model number is SP845NU-3-C.
This SP745 780-845 Replaces Robertshaw SP735L, 780-745, 780-845 is the direct cross version of SP745 and A.O. Smith 9004426105 182352.

Below are the specifications of the new SP845 780-845:
Input Voltage: 24 VAC to 50/60 Hz
Transformer: 24 VAC / 20 VA
Safety lockout timing: 90 seconds
Spark rate: 4 to 15 sparks per second
Pilot valve, Main valve: 1 amp at .5 PF
Combined load: 1.5 at .4 PF
Flame sense current: .7 mA DC @ 25 degrees C / 24 VAC
Maximum total current load: 1.5 amp
Flame failure re-ignition time: 2 seconds maximum
Ambient temperature rating: 40 to 175 degrees (-40 to 80 degrees C)
Relative humidity: 95% non-condensing at 104 degrees F

Need Help? Call us:

1-269-685-4123

The Robertshaw SP745 780-845 work in the following series:

When the thermostat calls for heat, the 780-845 control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established.

The 780-845 lockout ignition control provides 90 seconds of spark, followed by a 6 minute time delay (purge) between ignition attempts. After three tries, if no pilot flame is sensed, the control goes into a one-hour lockout period. At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition.
During lockout, you may override the auto-system, and manually reset the unit at the thermostat. The green diagnostic LED will be on continuously for normal operation. The LED will be off for internal lockout and will flash continuously for problems external to the control (ie. not sensing flame).

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
No
The SP745 will replace the following units:
G60QHL-1
G60QHL-2
CSA49A-600R
CSA49A-601R
CSA49A-605R
CSA51A-601R
CSA52A-600R
G600AX-2
G600AX-3
G600KX-1
G600LX-1
G600LX-2
G600LY-1
G600MX-1
G600NX-1
G600RX-1
G60AAG-2
G60AAG-7
G60CAG-8
CSA491-600
G60CAG-9
G60CBG-2
G60CBG-3
G60CBG-4
G60CBG-5
G60CBG-6
G60CBG-7
G60CBG-8
G60CBG-9
G60PFH-1
G60PFH-2
G60PFL-1
G60PML-1
G60PVL-1
G60QAG-1
G60QAG-3
G60QAK-1
G60QBK-2
G60QBK-3
G60CG-1
G60QFL-1
G60QGH-1
G60QJL-1
G60QJL-1
G60QLK-1
G60QRH-1
G60QRH-2
G60QRH-3
G60QRL-1
G60QRL-2
G60QSL-1
G60QTH-1
G60QTL-1
G60QUL-1
G60RGL-1
G60RHL-1
G60RSL-1
G60ZAG-1
G60ZAG-2
G65BLG-1
G65DBM-1
G65DBM-2
G65DBM-3
G65DCM-1
G65DFM-1
G65DKM-1
G65DLM-1
G65QBM-1
G65QBM-3
G66MG-1
G66MG-2
G66NG-1
G67AG-7
G67AG-8
G67AG-9
G67BG-2
G67BG-3
G67BG-4
G67BG-5
G67KG-1
G67LG-1
G67MG-1
G67MG-2
G67MG-3
G67MG-4
G67NG-2
G67NG-4
G770KGA-1
G770KHA-1
G770KHA-2
G770LGA-1
G770LGC-2
G770LGC-3
G770LGC-4
G770LHA-1
G770LHA-2
G770MGA-1
G770MGA-2
G77OMGA-3
G770MGC-1
G770MGC-2
G770MGC-3
G770MGC-4
G770MGC-5
G770MGC-6
G770MHA-1
G770MHA-2
G770NGA-1
G770NGC-4
G770NGC-5
G770NGC-6
G770NGC-7
G770NHA-1
G770RGA-1
G770RHA-1
G770RHA-2
G775RGA-1
G775RHA-2
G779LHA
Y79ABC-1
Y79ABC-2
Y79ABC-3
Y79ABC-4
Y79ABC-5
Y79ABC-6
Y79ABC-7
Y79ABD-1
Y79ABD-2
Y79BBA-1
Y79BBA-2
G67AG-10
G67AG-11
G60CAG-3
G60CAG-4
G60CAG-5
G60CAG-6
G60CAG-7
780-002
780002
SP745
97H0401
SP745-NU-3-60-5
9998-360
SP745NU3605
CAR4E959
780-001
780-002
CAR780002
780.712113
CAR780002