HSP300ID HeatStar Pro Series Indirect Oil Fired 300,000 Btu Construction Heater

Heatstar Pro Series heater HSP300ID is an indirect oil-fired construction heater. With the included 16" duct adapter installed, the HSP300ID supports up to 50 ft. of duct-vented heating. A built-in heat exchanger keeps the exhaust output separate from the heat output.

The HSP300ID Indirect Construction Heater's Features

This Heatstar Pro Series torpedo heater is mounted on a heavy-duty base with a set of solid rubber wheels. The HSP300ID's stainless steel combustion chamber water-resistant flame control box helps ensure reliable jobsite heating.

With two supported air duct adapter sizes, 16" and heavy-duty, the HSP300ID is a great choice for jobsites with limited ventilation.

Please note that the HSP300ID requires at least 1.98 sq. ft. of fresh air ventilation for safe operation and is not an indoor heating unit.

This heater includes a 27 gal. capacity fuel tank. To help reduce condensation build-up in the exhaust system, a heated fuel filter is built into the HSP300ID.

Specifications of the Heatstar Pro Series HSP300ID

• Air Flow: 1950 CFM
• Supported Fuel: Kerosene, Diesel #1 + #2, fuel oil, jet fuel
• Fuel Consumption: 2.02 gal/hr.
• Fuel Tank Capacity: 27.7 gal.
• Power Supply: 1 Phase, 120V, 60Hz, 11.4A
• Power Consumption: 1.4 kw

Dimensions of the HSP300ID Heatstar Pro Indirect Heater

• Length: 63 in.
• Width: 28 in.
• Height: 37 in.
• Weight (empty tank:) 271 lbs.
• Weight (full tank:) 469 lbs.
• Supported Duct Sizes: 16" Single Duct, 16" Air Recycling Duct