HSVFR10LP HEATSTAR PLAQUE HEATER

Reference Item Only
Part Number
HSVFR10LP
Part Number: HSVFR10LP
Compatible Brands: Enerco, Heatstar, Mr Heater

ENJOY THE COMFORT AND WARMTH OF SAFE, CLEAN-BURNING HEAT.

HeatStar Model HSVFR10LP adds year-round comfort for recreation rooms, room additions, enclosed porches, cabins, workshops and more.

• Easy To Install - Wall mount or free standing (feet kit included)
• Safe - Built-in low oxygen shut-off sensor
• Operates During Power Outages - Without electricity
• Economical - 99.9% Efficient
• Limited 5-Year Warranty

No venting or chimney required. Tools needed for installation: Phillips screwdriver and pipe wrench.
Check local codes for installation requirements.

HeatStar Vent-Free Blue Flame Gas Heater model HSVFR10LP features:
10,000 BTU/HR
Heats up to 300 square feet.
Low and high heat settings.
Dimensions: 15.75”W x 20”H x 7.5”D
Net Weight: 18 lbs

IMPORTANT SAFEGUARDS
Owner’s manual must be read prior to installation and operation of heater. This heater cannot be converted between natural gas and propane. Professional installation is recommended. Always check
local codes for permitted uses. Not recommended for operation above 4,500 feet. Use adequate ventilation during operation. See owners manual regarding warranty information and disclaimers.
CAUTION:
This appliance is to be used as a supplemental heat source and should not be used as the primary heat source. This heater must be installed and serviced according to the manufacturer’s instructions
and state and local building codes. Select a model with the appropriate heat output using sizing guidelines provided by the manufacturer. Using a heater with greater heat output than recommended
may be harmful to your health. As with other fuel burning appliances, local building codes may require installation of a carbon monoxide detector in the area where the heater is installed.
Product specifications subject to change without notice.
This heater obtained the indicated BTU ratings when tested per ANSI Z21.11.2-2002, addenda Z21.11.2a-2003 “Gas Fired Room Heaters”, Volume II, “Unvented Room Heaters.”
NOT FOR USE IN BATHROOMS, BEDROOMS OR RECREATIONAL VEHICLES

Vent-Free Blue Flame Gas Heat

10,000 BTU/HR
Heats up to 300 square feet.
Low and high heat settings.
Dimensions:
15.75”W x 20”H x 7.5”D
Net Weight:
18 lbs

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
No
No