FDT30BFA Dual-Fuel Avenger Blue Flame Vent-Free Heater, 30,000 BTU

The FDT30BFA is a vent-free blue flame gas heater rated at 30,000 BTUs. This blue flame heater has a maximum heat coverage of up to 1,400 sq. ft.

The Avenger FDT30BFA features a push button piezo ignition system, 5-stage heat adjustment, and an automatic shut-off ODS safety system.

Using dual-fuel technology, the FDT30BFA is able to run off either natural gas or liquid propane gas. It comes pre-configured for liquid propane gas.

Fuel conversion should only ever be handled by a qualified installer.

The FDT30BFA also goes by the part number 110011.

Features of the FDT30BFA Avenger Heater

• Comes from the manufacturer configured for liquid propane gas usage. A qualified installer can convert the unit to natural gas.
• Adjustable 5-stage thermostat control automatically cycles the burner on and off to keep a consistent room temperature.
• An safety shutoff oxygen depletion sensing switch prevents heater operation if insufficient fresh air is detected.
• Slim and space-efficient design makes the FDT30BFA convenient to use in a wide range of applications.
• Supports the installation of an optional 120 VAC 60Hz blower fan.

Specifications

Max. Heat Rating: 30,000 BTUs (Natural Gas/Liquid Propane)

Heating Coverage: 1,400 sq. ft.

Natural Gas Pressure Specs

• Pressure Regulator Setting: 4 in. w.c
• Max. Inlet Pressure: 9.5 in. w.c
• Min. Inlet Pressure: 5 in. w.c

Liquid Propane Gas Pressure Specs

• Pressure Regulator Setting (LPG): 9 in. w.c
• Max. Inlet Pressure (LPG): 14 in. w.c
• Min. Inlet Pressure (LPG): 11 in. w.c

Dimensions:

• Height: 26.18 in.
• Width: 28.15 in.
• Depth: 9.84 in.
• Weight: 24.3 lbs.