2025 © Allparts Equipment & Accessories. All Rights Reserved.
FDF400T-ZC Vent-Free 32,000 BTU Duluth Forge Fireplace Gas Insert with Thermostat Control
Reference Item Only
Part Number
FDF400T-ZC
The FDF400T-ZC is a vent free dual-fuel fireplace insert from Duluth Forge, with a maximum input rating of 32,000 BTU/HR.
This vent free fireplace insert comes equipped with a battery-powered electronic Piezo ignitor and an ODS pilot with a safety shutoff system.
Thermostat heat control is also included with the FDF400T-ZC. This automatically cycles the burners to help keep a consistent temperature.
Features of the FDF400T-ZC Gas Insert
- Able to be configured to operate off natural gas or liquid propane gas.
- Features automatic burner-cycling thermostat control.
- An Oxygen Depletion Sensing (ODS) system automatically turns off the pilot if insufficient fresh air is available.
- Comes standard with a decorative log set that must be configured as shown in the owner's manual for proper operation.
- Heater controls are easy to access behind the front panel below the fireplace doors.
- Supports the installation of a blower for assisted heat distribution
- Supports remote control operation with remote transmitter and receiver.
Specifications
Compatible Gas Types: Natural Gas (NG) OR Liquid Propane Gas (LPG)
Max. Input Rating: 32,000 BTU/HR (NG and LPG)
Min. Input Rating: 14,500 BTU/HR (NG) 24,500 BTU/HR (LPG)
Regulator Pressure Setting: 4 in. W.C (NG) 9 in. W.C (LPG)
Ignition Battery Requirements: AAA Batteries
Dimensions:
Height: 29.5 in.
Width: 29.1 in.
Length: 15.6 in.
Weight: 59.5 lbs.