2025 © Allparts Equipment & Accessories. All Rights Reserved.
F273401 Pilot ODS Assembly with Wires OEM CSA Certified fits Mr Heather Buddy Series MH9B MH9BX
The F273401 Pilot ODS Assembly is LPG Propane Gas 2 piece pilot assembly that includes both the thermocouple with fitting and matching thermo-puck end with fitting.
Both wires will have the 1/4 female spade connector pre-installed for the thermocouple to be used with an inline tip switch.
This F273401 Pilot ODS is an OEM CSA Certified and stamped to ensure product safety standards.
The F273401 Pilot Ods Assembly was used on the Mr Heater Buddy Heater models MH9B and MH9BX.Service Note:
If you are using your Mr Buddy portable heater with a 20 Lbs LPG propane tank it is Highly Recommended to use the F273699 Fuel Filter Aspirator to both remove contaminants and to reduce the raw propane oil from clogging inside the pilot ODS assembly.
At Allparts Equipment, we are committed to providing our customers with the highest quality and safest products possible and that is why we utilize CSA-certified components in many of our products.
This commitment to using certified components demonstrates our dedication to:
- Compliance with Standards (Canada and US): The CSA mark sometimes includes a "C" and "US," indicating dual certification.
This means the component has been tested by CSA and meets the applicable standards for both Canada and the United States, simplifying compliance for businesses operating in both markets. - Customer Safety: Protecting our customers from potential gas-related hazards is our top priority.
- Product Reliability: Ensuring that our equipment performs reliably and consistently over time.
- Compliance with Regulations: Meeting all applicable safety standards and regulations in both Canada and the United States.
By choosing Allparts Equipment, you can be confident that you are choosing products built with safety and quality in mind.
The F273401 Pilot ODS was used on the Mr Heater and Heatstar portable buddy style heaters heaters and was used with a tip switch.
The tip switch that was used with this Pilot ODS assembly is the 73403 Tip Switch.
The 73404, 73404CE, 73499 can all be replaced with the F273401 Pilot ODS with Tip Switch wire and all these Pilots will use the 73403 Tip Switch.
At Allparts Equipment, we are committed to providing our customers with the highest quality and safest products possible and that is why we utilize CSA-certified components in many of our products.
This commitment to using certified components demonstrates our dedication to:
- Compliance with Standards (Canada and US): The CSA mark sometimes includes a "C" and "US," indicating dual certification.
This means the component has been tested by CSA and meets the applicable standards for both Canada and the United States, simplifying compliance for businesses operating in both markets. - Customer Safety: Protecting our customers from potential gas-related hazards is our top priority.
- Product Reliability: Ensuring that our equipment performs reliably and consistently over time.
- Compliance with Regulations: Meeting all applicable safety standards and regulations in both Canada and the United States.
By choosing Allparts Equipment, you can be confident that you are choosing products built with safety and quality in mind.