V42P-A DESA DIRECT-VENT GAS FIREPLACE

V42P-A is a direct-vent propane/LP gas fireplace manufactured by DESA.

Features:

• The venting system may be routed to the outside of your home in several ways. It may vent through the roof (vertical) or it may vent to an outside/exterior wall (horizontal). The vent pipe installation is very important to allow for proper operation. You must follow the venting instructions very carefully for either vertical or horizontal applications.
• This fireplace may be installed in any room of your house provided all local codes and these installation instructions are followed.
• This fireplace does not require electricity to operate.
• Only the blower requires electricity if installed. If you plan to install the blower at a later date, the outlet must be wired at the bottom of the fireplace when framing.
• A piezo ignitor and ceramic electrode create spark to ignite the pilot light. It does not require matches, batteries or any other source of ignition to light the pilot.
• Each time you turn on your fireplace, you may notice some amount of condensation on the inside of the fireplace glass. This is normal and will disappear after 10-20 minutes of operation.
• Your direct-vent gas fireplace system (fireplace and venting) is a balanced and sealed gas operating unit. It requires approximately 1020 minutes of operating time before the flame pattern stabilizes.