2024 © Allparts Equipment & Accessories. All Rights Reserved.
FREE SHIPPING WHEN SELECTED
90029 Anodized Axial Cam Pressure Washer Pump Kit
In stock
Part Number
90029
$149.90
Free Standard UPS Ground Shipping!!
90029 is a pressure washer pump kit from OEM Technologies. This black anodized axial cam replacement pump has a durable forged brass head and stainless steel pistons that reduce the wear on the pump's seals.
This FNA Group replacement pump is a highly efficient pump that minimizes engine load while delivering top performance across a wide range of pressure washer applications.
This pump also comes equipped with patent pending PowerBoost Technology to enhance cleaning performance and reduce vibration and heat to deliver a better working environment for the operator while extending engine and pump life.
The 90029 replacement pump has high-performance pressure seals and oversized rear ball bearings to reduce friction and allow long-lasting performance in the most demanding cleaning environments. It also features a stainless steel integrated unloader with an industry-leading built-in easy-start system.
An industry four-bolt mounting pattern secures to a 3/4 in. shaft motor. The pump is driven by a 3/16 in. square key.
OEM Technologies pumps are used on many portable cold water power washers manufactured by FNA Group under private labels, including Simpson, DeWalt, Delco, Excel, Mega Shot, Cub Cadet, Black and Decker Stanley, Husky, Briggs and Stratton, Campbell Hausfeld, Pressure washer Pro, APE, Sears Craftsman, Generac, Coleman PowerMate, Troy Built and other brands of portable pressure washers.
Features of the 90029 Pump Kit
- 3400 PSI @ 2.5 GPM
- Features PowerBoost Technology
- OEM’s Preset Unloader assembly with the built-in easy-start system.
- Thermal relief protection to prevent pump overheating
- Rear oversized radial ball bearings are installed for better wear and friction resistance, and precision ceramic-coated pistons for extended seal life.
- Crankcase is manufactured from fully anodized die-cast aluminum for corrosion protection and is sealed to prevent contamination and lube failure.
- Gas engine flange and 3/4 hollow shaft that fits most horizontal shaft engines.
Specifications of the 90029 Pump Kit
- PSI: 3400 Max
- GPM: 2.5
- Inlet Port: 3/4 in. GH
- Discharge Port: 22MM Threaded male fitting
- Inlet Pressure Range: 10-60 PSI
- Thermal Relief Port: 1/4 in. NPT
- Shaft Diameter: 3/4 in.
- Flange Bolt Pattern: SAE J-609A
- Key Way: 3/16 in.
- Pump Oil Capacity: 6.0 fl oz.
This 90029 OEM Technologies pump comes with a 2-year limited warranty.
OEM Technologies™ Axial Cam Pump Kit 90029
3400 PSI at 2.5 GPM Axial Cam Pump Kit with Hardware and accessories.
Designed for performance, the 90029 OEM Technologies Replacement Pump Kit with Axial Cam Pump is highly efficient and minimizes engine load.
This easy-to-install pump replacement kit is for gas pressure washers* with a horizontal engine and a 3/4" diameter shaft, such as the Honda GC190 and Honda GX200.
This pump can produce up to 3400 PSI Static Burst Pressure at 2.5 GPM
The 90029 Pump Kit Replacement pump from Simpson has stainless steel pistons for improved seal life and features a stainless steel integrated unloader with our easy-start system. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
Whether you’re looking for a replacement part or an accessory to enhance your cleaning experience, SIMPSON has the right one for you! Our accessories provide more cleaning options for the homeowner and professional to get the job done efficiently. Many of our accessories are designed to fit most gas and electric pressure washers.
- Extend the Life of Your Pressure Washer: Save money by replacing your pump instead of buying a whole new power washer.
- This easy-to-install kit is great for power washers that can support 3400 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
- Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet.
- The SAE standard bolt pattern that fits most* gas-powered pressure washers.
- Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
- Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
- Extended Durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode.
- The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
- Get the Right Pump for Your Machine: This pump is designed for gas-powered pressure washers with horizontal engines.
- Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Write Your Own Review
No
No
Related Products
Check items to add to the cart or