7110144 SEAL RETAINER SPACER KIT COMPLETE SET OF 3 15.50MM SPACERS

7110144 Seal Retainer Kit Spacer kit is a set of 3 15.50MM Tall plastic seal retainers for the AAA series of high pressure pressure washer pumps manufactured by FNA Group.

Most often the 7110144 Seal Retainer (15.50MM tall) was used on the older pumps with the ribbed crankcase but we always recommend making sure the correct size is ordered.
If you need the taller 17.65MM Seal Retainers you will need to order the 7113580 Retainer Kit 17.65MM


This 7110144 Seal Retainer Kit can be used on multiple pumps including the following models but need to be verified for size because there were running changes made on these components.

10.0GA13* AAA 3800 PSI Cold Water Pressure Pump
530003 AAA 3800 PSI Cold Water Pressure Pump
90032 AAA 3800 PSI Cold Water Pressure Pump
C-40 AAA 3800 PSI Cold Water Pressure Pump

9.4GA13* 4000 PSI Direct Drive Triplex pump
530004 4000 PSI Direct Drive Triplex pump
90033 4000 PSI Direct Drive Triplex pump
C-40 4000 PSI Direct Drive Triplex pump

11.6GA13 4200 PSI 4.0 GPM AAA Cold Water Triplex Plunger Pump
530006 4200 PSI 4.0 GPM AAA Cold Water Triplex Plunger Pump
90034 4200 PSI 4.0 GPM AAA Cold Water Triplex Plunger Pump
53BRD40 4200 PSI 4.0 GPM AAA Cold Water Triplex Plunger Pump

530007 4200 PSI 3400 RPM Belt Drive 24MM Shaft Pump
C-45* 4200 PSI 3400 RPM Belt Drive 24MM Shaft Pump

10.0GA13* 3800 PSI @ 3.5 GPM AAA Cold Water Plunger Pump
530010 3800 PSI @ 3.5 GPM AAA Cold Water Plunger Pump
90038 3800 PSI @ 3.5 GPM AAA Cold Water Plunger Pump
53BRD35 3800 PSI @ 3.5 GPM AAA Cold Water Plunger Pump
C-41* 3800 PSI @ 3.5 GPM AAA Cold Water Plunger Pump

9.4GA13* 4000 PSI AAA 3.3GPM Pump
90039 000 PSI AAA 3.3GPM Pump
530012 000 PSI AAA 3.3GPM Pump
C-41 000 PSI AAA 3.3GPM Pump