18302 IDLE DOWN ASSEMBLY NO LONGER AVAILABLE

The Idle Down Assembly is no longer available.

You can bypass this and remove it from your pressure washer.

Follow the instructions below:

- Remove the idle control cable from the engine throttle.
- Loosen and remove the quick connect and chemical injector (as one piece) from the idle control assembly
- Remove the pressure hose that leads from the pump to the idle control assembly from the high pressure pump outlet.
- Thread the quick connect/injector onto the high pressure pump outlet. Make sure to use a pipe dope or thread sealer to prevent leaking.
- Loosen the bolts holding the idle control assembly in place on the frame and remove the assembly.