2025 © Allparts Equipment & Accessories. All Rights Reserved.
M50065 Fuel Pump 1725 RPM Clockwise Rotation fits DESA Portable Heaters
The DESA M50065 High Pressure Fuel Oil Pump was a 1725 RPM 150 Max PSI high pressure single stage oil pump designed for use with the High Pressure Portable heaters made by DESA International.
The "Old Style" M50065 is now replaced with the Suntec A1YD-7154-B Single Stage high pressure pump.
The M50065 Fuel Pump was most commonly used on the B350 Series heaters as well as the B600 Series High Pressure Portable heaters.
This new series M50065 replacement pump from Suntec can be used in place of the original Desa M50065 high pressure fuel oil pump. The original Desa pump was used on several high-pressure heaters, including Reddy High Pressure Heaters, Master High Pressure Oil Fired Heaters, and Dayton Oil Fired heaters.
It was also used by manufacturers such as Knipco , LB White , Dayton, and Koehring, as well as other privately labeled portable heaters manufactured by DESA International out of Bowling Green Kentucky prior to the company closing its doors in 2008
The A1YD-7154-B / M50065 Fuel pump is designed for Fuel oil #2 and lighter, B6-B100 (blends from 6% up to 100% biodiesel, per ASTM D396.)
Pipe Installation & Bleed Notes
One pipe installation:
The by-pass plug must not be installed.
The excess fuel is returned back to the inlet.
Two pipe installation:
The steel plug of the return port must be removed, and the by-pass plug must be inserted in the return port, allowing excess fuel to be bypassed back to the tank.
The return plug must not be reinstalled.
Bleed:
In one pipe operation, the easy flow bleeder valve must be loosened to bleed the system.
Bleeding in two-pipe operation is automatic, but it may be accelerated by loosening the easy flow bleeder.
The M50065 High Pressure Fuel Oil Pump is a Webster Fuel pump and can be used on portable heaters burning kerosene, diesel and fuel oil # 2.
Service Note
For replacing an older style High Pressure pump that had an internal fuel filter, the 098560-04 Kit will need to be used.
The M50065 is a gear type fuel pump attached to the end of the electric motor and can deliver up to 110 psi of fuel pump pressure.
Compatibility Information
This M50065 Fuel Pump was used on many of the Desa High Pressure Oil Fired heaters and sold under various private labels including Desa International, Master Heaters, Dayton High Pressure Heaters, Sears Commercial Heaters, Reddy Heaters and others.
Some of the Model using the M50065 Fuel Pump are as follows:
Reddy High Pressure Heater Models:
- R350
- R350A
- R600
- R600
Desa High Pressure Heater Models:
- B350HA
- B600HA
- SB350D
- SB600D
Master High Pressure Heater Models:
- B350
- b350A
- B350B
- B350D
- B600
- B600A
- B600B
Knipce and Koehring High Pressure Heater Models:
- F350
- F350AP
- K350
- K350A
- K600
- K600A
Dayton High Pressure Oil-Fired heaters Model:
- 3E358
- 3E359
- 3E358A
- 3E359A
- 3E358B
- 3E359B
L.B. White:
- CP350AK
- CP600AK
Koehring Heaters:
- K350
- K350A
- K600
- K600A