H8656 Control Module SIT Proflame 2 IFC Series

The H8656 IHP Sit Proflame2 IFC Integrated Fireplace Control board is a device that allows the automatic ignition and pilot flame supervision, to command the functions of an hearth appliance.

It is configured to control the ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous pilot ignition) modes.

The Proflame2 IFC board controls directly the pilot assembly and an automatic valve 880, 886 and 885 of the Proflame families using low voltage electric power.

The IFC board is powered by Line voltage (AC) with provision of battery back up in case of main power loss. Fans and lighting features will not function when the IFC is powered by battery back up.

The Proflame IFC has the ability to control the comfort fan through 6 speeds, modulate an accent light through 6 levels and switch on or off an auxiliary output via the remote transmitter.

This IHP H8656 control module has the following specifications:

AC supply voltage and frequency 120V~60Hz max. 2.5A

Battery supply voltage 6V

Ambient Operating Temperature 14÷176°F (-10÷80°C)

Radio frequency remote control 315 MHz

Light dimming output 120V~60Hz max. 0.5A (res.)

Comfort fan output 120V~60Hz max. 2A (0.5pf)

Burner fan output 120V~60Hz max. 5A (0.5pf)

Spark voltage >10kV over 5mm spark gap

Spark energy >0,7mJ

Spark frequency 1Hz

Pilot ignition source Intermittent/Continuous

Flame Failure Response time 10 s

Waiting time 2 s

ATMO / FAN Pre-purge time 2 s / 15 s

ATMO / FAN Post-purge time 2 s / 120 s

Inter-ignition time 30 s

Safety time 60 s

Number of trial for ignition 2

Comfort fan startup delay 5 min

Comfort fan shut off delay 12 min

Recycle Time 30 s

This H8656 control module measures approximately 6 ^1/4 x 3 ^1/2 x 1 ^5/8 inches