Sorry, nothing has been found for “” .
Suggestions
Products
CON1001 SkyTech Remote Control System Kit On/Off Only
In stock
$119.80
MSRP:
In stock
Part Number: CON1001
Compatible Brands: Skytech
Shipping Weight: 2 Lbs
Non Returnable
I understand this item CAN NOT be returned if the tamper evident packaging has been opened. Packaging is see-through to allow for proper inspection prior to unwrapping.
The CON1001 remote control system from SkyTech is designed for use with a solenoid-operated gas valve assembly, such as the AF1000 series. It will not work with millivolt-operated gas valves.
This kit will replace both the 118624-01 Remote Transmitter and the 118625-01 Remote Receiver for your basic ON/OFF Control. This system does not provide thermostatically controlled operation.
The CON1001 remote kit was designed to provide a safe, reliable, and user-friendly system for gas heating appliances, including ventless gas logs, vent-free wall heaters, direct vent systems, and more.
Features of the CON1001 SkyTech Remote Kit
- Automatic programming with multiple security codes.
- 4-button On/Off/Mode/Set transmitter with fingerprint-resistant surface.
- All battery-operated Remote and Receiver.
- Operates on radio frequencies with a non-directional RF signal.
- Operating range of approximately 20=feet with a total of 63,532 security codes programmed into the transmitter at the factory, preventing duplicate codes being used on multiple appliances.
- Compatible with several Desa models such as the NY series 100-117.
Related Items
This remote control SYSTEM offers the user a battery-operated remote control to power the latching solenoid such as those used with the AF-1115 American Flame gas valves used in some decorative gas logs, gas fireplaces, wall heaters and other gas heating appliances.
The circuit uses the battery power from the receiver to operate a latching solenoid. The circuit has reversing polarity software which reverses the positive (+) and negative (-) output of the receiver's battery power to drive solenoid ON/OFF FLAME or open/close.
The SYSTEM is controlled by the remote transmitter. The transmitter operates on a 12V battery made specifically for remote controls and electronic lighters. Before using the transmitter install the 12 volt (A-23) battery in the battery compartment.
It is recommended that ALKALINE batteries always be used for longer battery life and maximum operational performance.
The transmitter has ON/OFF functions that are activated by pressing either button on the face of the transmitter. When a button on the transmitter is pressed, a signal light on the transmitter illuminates to verify that a signal is being sent. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system's design. If the signal light does not illuminate, check the position of the transmitter's battery.
No Reviews Yet
Only registered users can write reviews. Please Sign in or create an account