2023 © Allparts Equipment & Accessories. All Rights Reserved.
7115203 Idle Down Valve and Cable Replacement Kit with Bolts
The 7115203 Idle Down valve and cable replacement kit is the complete engine throttle cable with attached idle down valve and mounting bolts for the FNA Group brands of pressure washers using this type of automatic idle control.
This 7115203 is used with the 510032 and 51ALD23 Vertical Axial pumps with the Push Idle control system.
This automatic Idle Control system was used on the following models of pressure washers:
DeWalt DXPW3224I Pressure Washer Item Number 61109
Take great care in the tightening of the Banjo Bolt on these kits.
A Torque Wrench and a Digital Tachometer will be required for proper installation.
Over tightening of the mounting bolt will result in the bolt breaking.
The banjo bolt manufacturer's maximum torque recommendation is 7-8 Ft lbs. / 88-96 In Lbs. / 10-11 N-M
Valve cap torque: 13 Ft lbs. / 159 In Lbs. / 18 N-M
Cable retention bolt torque: 7.3 Ft lbs. / 87.6 In Lbs. / 9.9 N-M
See Included Instructions or download from this listing as PDF Document.