66637 Motherboard for PSBF66W Pellet Stove from Cleveland Iron Works

This 66637 motherboard is the OEM replacement main control component of the PSBF66W and PSBF66W-CIW Cleveland Iron Works Bay Front Pellet Stove from Mr. Heater/Enerco products.

This motherboard is a 7.5A fuse-protected board powered by a 120 Volt AC current and will supply both AC and DC power to required circuits through integrated transformers and diodes. 

Features of the Cleveland Iron Works PSBF66W Motherboard:

• Power Input  1/4 Male Connection Spades.
• Ignition Bar 1/4 Male Connection Spades.
• 7.5 Amp Internal Fuse protected Motherboard
• Auger Motor 1/4 Male Connection Spades.
• Combustion Fan 1/4 Male Connection Spades.
• Blower 1/4 Male Connection Spades.

• Hopper Sensor 2 Pin Black Female Connector
• Earthquake Sensor Green Push in Female Connector
• Display Panel Connection 4 Pine White Female Connector
• Vacuum Switch 3 Pin Male Connector
• Exhaust sensor 2 Pin Red Female Connector
• Protection Sensor 2 Pin Yellow Female Connector.
• Room Sensor 2 Pin White Female Connector

Service Note:
Before replacing your 66637 Motherboard, make sure to check the 7.5Amp fuse inside the control board housing and shown in our photo.

We are sorry, but this item is NOT RETURNABLE for refunds.

These items come with a 90 day warranty for exchange only. Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.