202274GS 3 LEG HIGH PRESSURE PUMP DIRECT DRIVE REAR FACING TUBES

The 202274GS Pump is a replacement vertically mounted 3-leg pump assembly for various pressure washers by Briggs and Stratton, Troy-Bilt, Generac, Sears Craftsman, and other affiliated brands of portable power washers

This replacement 202274GS Pump mounts vertically underneath your engine and is designed to operate at 3400 RPM; when correctly mounted, the inlet and outlet tubes will face the rear of the pressure washers towards the handle of the power washer.

This AR North America Annovi Reverberi 202274GS 3-legged plunger pump is rated at up to 2.2 GPM at 2600 PSI when used with a minimum 4.3HP gasoline-driven engine.

The direct drive system connects most 7/8 keyed shaft 4.3 HP and above engines. It has a built-in pressure control unloader valve, bypass system,EZ Start System, and chemical injector and comes with a standard 22mm-14 twist connect outlet.

Service Note:

Before placing an order for a replacement pump in the Annovi Reverberi SX Series, please make sure that the inlet and outlet tubes are positioned on the opposite side of the spark plug.

Specifications:

Minimum Horsepower 4.3 HP

PSI: 2600 Max

GPM: 2.2

Inlet Port: 3/4" GH

Discharge Port: 22MM Threaded male fitting

Inlet Pressure Range: 10-60 PSI

Thermal Relief Port: 1/4" NPT

Shaft Diameter: 7/8 Inch Keyed

Flange Bolt Pattern: 3 Legged (3 bolts) 7 11/16", 6 3/16", 6 7/16"

Key Way: 3/16"

Pump Oil Capacity: 4.5 fl oz.

Head: Anodized Aluminum

This 202274GS Replacement Pump from AR North America pump has a 1-year limited warranty.