Orders placed Monday through Friday before 12:00 noon ET are typically shipped same day!

0.584.211-00 SIT PROFLAME PLUS SERIES RECEIVER 4 PIN STEPPER MOTOR CONNECTOR

More Views

0.584.211-00 SIT PROFLAME PLUS SERIES RECEIVER 4 PIN STEPPER MOTOR CONNECTOR

Part Number: 0.584.211-00

Documents:

This item has been replaced with a new part. Please choose the Order Replacement Part option listed below to order the replacement part. #122708-01

The Proflame Receiver Model 0.584.211-00 has now been replaced with the new Proflame Receiver Model 0.584.211-01

The new receiver comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

The Default setting for the 0.584.211-00 as as follows:

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section.

Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
Description
This old style proflmae reciver is No Longer Available and has been replaced by the 122708-01 Proflame remote replacement. kit



Below information is for reference purposes only.
The 0.584.211-01 Receiver is No Longer Available.



The Default setting for the 0.584.211-00 as as follows:

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequecy section.

Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.