© Allparts Equipments & Accessories. All Rights Reserved.
DetailsPlease note a new Stepper Motor will need to be order and installed by a certified installer if you are replacing the old style proflame receiver.
The new 0.584.211-01 will not work with the old style stepper motor and Red 6 Pin ribbon wire harness.
This part is considered an electrical part and cannot be returned after the item has been opened.
Returns on this 0.584.211-01 Receiver Module will not be accepted.
- Service Information
DIP SWITCH SETTINGS STOCK:
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN
Remote on Frequency 5
Turn Remote on then scroll down to the Timer:
Press the Minus button - 10 times...you are now in the frequency section.
Now use your up and down keys to get frequency 005
NOTE: The + Key will change your temp from C to F...pay attention.
Press Minus- again to exit and your remote is now set.
You May Also Be interested In...