Orders placed Monday through Friday before 12:00 noon ET are typically shipped same day!

0.584.211-01 RECEIVER PROFLAME PLUS SERIES 0.584.211 USES 4 PIN BLACK CONNECTOR

More Views

0.584.211-01 RECEIVER PROFLAME PLUS SERIES 0.584.211 USES 4 PIN BLACK CONNECTOR

Part Number: 0.584.211-01

Documents:

This item has been replaced with a new part. Please choose the Order Replacement Part option listed below to order the replacement part. #122708-01

This old style proflame receiver is No Longer Available and has been replaced by the 122708-01 Proflame remote replacement. kit

Below information is for reference purposes only.
The 0.584.211-01 Receiver is No Longer Available.


This SIT Controls Model .0584.211-01 Proflame Receiver is the latest model receiver kit and replaces the older 0.584.211-00 Proflame receiver kit.

The new 0.584.211-01 Proflame Receiver kit comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section.

Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are NOT RETURNABLE for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

 

Description
Please note a new Stepper Motor will need to be order and installed by a certified installer if you are replacing the old style proflame receiver.

The new 0.584.211-01 will not work with the old style stepper motor and Red 6 Pin ribbon wire harness.

This part is considered an electrical part and cannot be returned after the item has been opened.

Returns on this 0.584.211-01 Receiver Module will not be accepted.
Service Information
DIP SWITCH SETTINGS STOCK:
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:
Press the Minus button - 10 times...you are now in the frequency section.
Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

You May Also Be interested In...