0.584.201 RECEIVER MODULE 6 PIN RED CONNECTOR

The SIT remote receiver module 0.584.201 has been discontinued and must be upgraded to the new SIT remote and receiver control module Replacement Kit 122708-01

This new series remote receiver control module will not hook up to the old stepper motor wire harness and must be replaced with a new stepper motor.

Please note a new Stepper Motor must be ordered in order for the flame height to be adjusted.
We suggest this installation be performed by a certified installer with proper testing equipment.

The new 122708-01 Sit Control remote and receiver replacement kit will not work with the old-style stepper motor and Red 6 Pin ribbon wire harness.

If your current fireplace uses Natural Gas, please order the 0907843 Stepper Motor.

If your current fireplace uses LPG Propane Gas, please order the 0907842 Stepper Motor

 
DIP SWITCH SETTINGS STOCK:
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section. Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.