PROFLAME RECEIVER 0.584.523
PROFLAME RECEIVER 0.584.523 0.584.523 Receiver Kit assembly for gas log appliances PROFLAME RECEIVER 0.584.523 GTMFS wire connection Proflame replacement fireplace receiver kit

0.584.523 RECEIVER KIT WITH SPLITFLOW CONTROL SIT

In stock
Part Number
0.584.523
$98.70
Part Number: 0.584.523
Brand: Sit Controls
Shipping Weight: 0.875 Lbs
Non Returnable
Click here to agree to Allpart's Return Policy.
Please see our return policy
⇧ Check The Box If You Want To Proceed.

The 0.584.523 Proflame Receiver Kit comes as a replacement kit assembly.

This 0.584.523 kit replaces the 0.584.223 receiver assembly.

This Receiver kit can be used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, and Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver, make sure to inspect the contacts and springs inside of the 0.584.223 Proflame receiver and install new alkaline batteries.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are NOT RETURNABLE for refunds!
These items come with a 90 day warranty for exchange only.

Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.

We do offer free testing on most Remote Transmitters and Remote Receivers for customers who choose to send these items in for testing.

Need Help? Call us:

1-269-685-4123

Related Items

The 0.584.523 SIT Controls replacement Proflame receiver is one of the most common receiver kit in the industry for direct vent fireplaces stoves and gas log sets.


The list of brands using the Sit Control to remotely operate the appliance is to large to list and why we suggest using the Sit Controls part number to verify the correct components are used.


Some known bards are Astria, Kingsman, Monessen, Montigo, Regency, Superior, Lennox, HHT, Hearth & Home, HHT, Heatilator, Vermont Castings, Napoleon fireplaces and log sets. 


This 0.584.523 will work with the known following brands.


IHP
Lennox
Desa International
FMI Fireplace Manufacturers Inc 

Kingsman

Monessen

Vermont Castings

Hearth & Home Technologies.

Montigo

Pacific Energy

Regency

SIT Controls



This receiver is an Original Equipment manufactures replacement product direct from SIT Manufacturing Company.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Troubleshooting


The first thing to check here before replacing either the receiver or the transmitter is going to be the battery connections in the receiver.

The receiver is exposed to much more heat and will typically be the item that is replaced most often due to the heat, but the connections still are the first thing to check.


Remove the receiver box from the fireplace. Carefully remove the battery door cover 0.584.806 and batteries from the receiver,

Be careful when servicing the receiver or changing the batteries not to break the tabs of the battery door cover.

Turn the cover over and remove the 2 small phillips screws in the back of the receiver.


Now slide the circuit board / battery contact housing out from inside of the receiver.  

Inspect the circuit board for corrosion, if you find corrosion on the circuit board you may need to replace the receiver with the new 0.584.221 Remote Receiver.  


Inspect the battery contacts and springs, clean the positive battery contacts and then stretch the negative battery contact springs in the battery contact housing.
Also clean the positive battery contacts on the battery door that was removed and also stretch the negative battery contact springs on the door.


Clean the receiver housing of any debris, dirt, dust or corrosion before reassembly.

Now reassemble the receiver in the reverse order of disassembly and install new Energizer alkaline batteries.

After installing the batteries you should hear 1 beep telling you the receiver has power and is ready to be programmed.

Push the program button one time and you should hear the 3 short beep telling you the receiver is now ready to accept a new code from the remote transmitter.


Now push the On/Off button of your remote transmitter and you should hear 4 beeps from the receiver telling you the receiver and the remote are now paired with the same RF code and ready to be used.


If after you have performed this procedure you are still not able to control your gas log set remotely then the most common failure part is the receiver.




N/A