1-800-475-5660
Need help? Email us at: customerservice@allpartsinc.com

KIT, ROTOR, VANES, NYLON, INSERT, ALL, MH/HS/

More Views

$28.08

KIT, ROTOR, VANES, NYLON, INSERT, ALL, MH/HS/

Part Number: F226831

Availability: In stock

The F226831 Kit consist of the following parts:
1 Rotor 5/8 .625 Thick X 2.115 Round Carbon
4 Carbon Blades .125 Thick x .625 Long x .595 Wide
1 plastic insert, Fits .0250 Shaft


F226831 is used on the following models:
Mr.Heater- MH50KT, MH75KT, MH125KT, MH175KT
Heatstar- HS50KT, HS75KT, HS125KT, HS175KT
All Pro- SPC-, SPC-K50, SPC-K100, SPC-K125, SPC-K150, SPC-K175
Universal- K50-FA, K75, K100-FAT, K125, K150-FAT, K175




The F226831 Rotor Kit is designed to fit the all of the Mr Heater and Heatstar portable heaters from 50,000 BTU's to 210,000 BTU's that run of kerosene, diesel fuel or JP8.

This F226831 is the heater's air pump assembly and consists of a rotor, rotor insert and four carbon blades rotating inside a pump ring body.

The F226831 rotor is driven directly by the motor and is attached to the motor shaft by means of a plastic insert. As the motor rotates, the carbon blades travel outward rubbing against the inside surface of the steel pump body.

Important Service Note:

The rotor blades used for the F226831 rotor are not as long as they are wide and can be installed incorrectly.

The blade/vane must be installed with the 5/8 .625 wide dimension matching the same thickness as the rotor. Failure to install the blade/vanes properly will result in a lack of air pump pressure and the inability for the heater to burn the fuel properly and reach operating temperature.

The rotor's position inside the pump body is such that it is not concentric with the pump body and a .003/.004 of an inch gap is set at the uppermost quadrant.

As the motor rotates, the air between the blades is compressed and routed to the nozzle through the air line.

The carbon rotor blades will wear out after time and cause the output filter to fill with carbon particles. Replacement of the output filter and carbon blades should be done on a regular basis .


Description

Details

The F226831 Rotor kit by Mr Heater will fit the following models:

MH50K MH75KT MH125KT MH175KT
Year 2003-2004
Serial Numbers: 0 thru 0117000

MH50K MH75KT MH125KT MH175KT
Year 2004-2005
Serial Numbers: 0118000 thru 0148811

MH50K MH75KT MH125KT MH175KT MH210KT
Year 2005-2006
Serial Numbers: 0149000 thru 0215151

MH50K MH75KT MH125KT MH175KT MH210KT
Year 2006-2007
Serial Numbers: 0215152 thru 0253699

MH50K MH75KT MH125KT MH175KT MH210KT
Year 2007-2008
Serial Numbers: 0253700 thru 0296656

MH50KT
Year 2008-2009
Serial Numbers: 270250-08001001 to 08005152

MH75KT
Year 2008-2009
Serial Numbers: 270275-08001001 to 08005496

MH125KT
Year 2008-2009
Serial Numbers: 270325-08001001 to 08005385

MH175KT
Year 2008-2009
Serial Numbers: 270375-08001001 to 08004605

MH210KT
Year 2008-2009
Serial Numbers: 270380-08001001 to 08002005

MH50KTR
Year 2009-2010
Serial Numbers: 270255 thru 09001001

MH75KTR
Year 2009-2010
Serial Numbers: 270270 thru 09001001

MH125KTR
Year 2009-2010
Serial Numbers: 270320 thru 09001001

MH175KTR
Year 2009-2010
Serial Numbers: 270370 thru 09001001

MH210KTR
Year 2009-2010
Serial Numbers: 270385 thru 09001001

MH50KTR
Year 2010-2011
Serial Numbers:LN-2702550001001

MH75KTR
Year 2010-2011
Serial Numbers: LN-2702550001001

MH125KTR
Year 2010-2011
Serial Numbers: LN-2703200001001

MH175KTR
Year 2010-2011
Serial Numbers: LN-2703700001001

MH210KTR
Year 2010-2011
Serial Numbers: LN-2703850001001

MH50KTR
Year 2011-2012
Serial Numbers: LN-270255 thru 11001001

MH75KTR
Year 2011-2012
Serial Numbers: LN-270255 thru 11001001

MH125KTR
Year 2011-2012
Serial Numbers: LN-270320 thru 11001001

MH175KTR
Year 2011-2012
Serial Numbers: LN-270370 thru 11001001

MH210KTR
Year 2011-2012
Serial Numbers: LN-270385 thru 11001001

The F226831 Kit consist of the following parts:
1 Rotor 5/8 .625 Thick X 2.115 Round Carbon
4 Carbon Blades .125 Thick x .625 Long x .595 Wide
1 plastic insert, Fits .0250 Shaft


F226831 is used on the following models:
Mr.Heater- MH50KT, MH75KT, MH125KT, MH175KT
Heatstar- HS50KT, HS75KT, HS125KT, HS175KT
All Pro- SPC-, SPC-K50, SPC-K100, SPC-K125, SPC-K150, SPC-K175
Universal- K50-FA, K75, K100-FAT, K125, K150-FAT, K175




The F226831 Rotor Kit is designed to fit the all of the Mr Heater and Heatstar portable heaters from 50,000 BTU's to 210,000 BTU's that run of kerosene, diesel fuel or JP8.

This F226831 is the heater's air pump assembly and consists of a rotor, rotor insert and four carbon blades rotating inside a pump ring body.

The F226831 rotor is driven directly by the motor and is attached to the motor shaft by means of a plastic insert. As the motor rotates, the carbon blades travel outward rubbing against the inside surface of the steel pump body.

Important Service Note:

The rotor blades used for the F226831 rotor are not as long as they are wide and can be installed incorrectly.

The blade/vane must be installed with the 5/8 .625 wide dimension matching the same thickness as the rotor. Failure to install the blade/vanes properly will result in a lack of air pump pressure and the inability for the heater to burn the fuel properly and reach operating temperature.

The rotor's position inside the pump body is such that it is not concentric with the pump body and a .003/.004 of an inch gap is set at the uppermost quadrant.

As the motor rotates, the air between the blades is compressed and routed to the nozzle through the air line.

The carbon rotor blades will wear out after time and cause the output filter to fill with carbon particles. Replacement of the output filter and carbon blades should be done on a regular basis .

Service Information

The F226831 Rotor Kit fits the following models:

MR. HEATER: All
HEATSTAR: All
ALL PRO: SPC-, SPC-K50, SPC-K100, SPC-K125, SPC-K150, SPC-K175
UNIVERSAL: K50-FA, K75, K100-FAT, K125, K150-FAT, K175

Reviews