Items 1-30 of 141494
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

  • Price: $10.45
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.199.744 Pilot Assembly is a Tri Directional replacement Natural Gas pilot assembly for various gas operated appliances and comes with the #62 Pilot Orifice pre-installed for High Altitude

The 0.199.744, 0199744,SIT0199744 Pilot Assembly is manufacture by SIT Controls and has been used by many different manufactures for use on Fireplaces, Gas Logs, Vented Gas Log Sets,Direct vent Gas Stoves, Vent Free Fireplace and Gas Stoves and other similar gas products and gas appliances.

The 0.199.744 Natural Gas Pilot Assembly Tri Directional pilot assembly with the following specifications:

SIT Controls 0199702 Pilot with SIT Reference 0.199.702
SIT Controls 0.240.002 24 Inch Thermo-Generator
SIT Controls 2.182.280 24 Inch Pilot Tube
SIT Controls 0.915.075 24 Inch Electrode and Ceramic Cable
SIT Controls 0.290.216 24 Inch Thermocouple
SIT Controls ******-** #62 Natural Gas Pilot Orifice Injector

Some of the manufactures that currently use the Sit Control gas control devices include, FMI, Empire Comfort Systems, Desa International, Comfort Glow, Fireplace Manufactures Inc, Monessen Hearth Systems, Majestic Fireplaces, Napoleon Stoves and Hearth Systems, Regency Comfort Systems, Montigo Systems, Lennox Hearth Products as well as many other appliance and control device manufactures.
  • Price: $124.90
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.240.002 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source.

This 0.240.002 Thermopile Generator Features:
Push-in clip, split nut, and adapter assembly for easy pilot burner installation.
Spade or quick-connect terminals available for millivolt gas control connections.
Male nut connector for Pilotstat® safety control power units.
  • Price: $35.09
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.240.003 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source. This 0.240.003 Thermopile Generator Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections. Male nut connector for Pilotstat® safety control power units.
  • Price: $39.70
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.240.005 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source.

This 0.240.005 Thermopile Generator Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections.
Male nut connector for Pilotstat® safety control power units.
  • Price: $49.80
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.290.120 Thermocouple is the OEM 39 inch thermocouple used in the SIT Control Pilot ODS assembly. The 0.290.120

Thermocouple has been used on fireplaces and gas log set that were made by DESA, FMI, Regency,Comfort Glow, Empire and many other brands of fireplaces and direct vent gas log sets.
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.290.216 TH24D0808 Thermocouple is the OEM 24 inch thermocouple used in the SIT Control Pilot ODS assembly.
|
The 0.290.216 TH24D0808 Thermocouple has been used on fireplaces and gas log set that were made by DESA, FMI, Regency,Comfort Glow, Empire and many other brands of fireplaces and direct vent gas log sets.
  • Price: $16.20
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.290.218 Thermocouple is the OEM 32 inch thermocouple used in the SIT Control Pilot ODS assembly.

The 0.290.218 Thermocouple has been used on fireplaces and gas log set that were made by DESA, FMI, Regency,Comfort Glow, Empire and many other brands of fireplaces and direct vent gas log sets.
  • Price: $24.90
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.584.004 Remote Transmitter Advanced remote control system for both direct vent and vent-free fireplace, gas logs and other hearth products.

The 0.584.004 Remote Transmitter is designed to work together with the 820 NOVA mV multi functional control gas valve and the stepping motor conversion kit as well as the 829 NOVA mV Gas Control Valve.

This 0.584.004 will replace the following transmitters by SIT Controls
FRC 0.584.004, FRC-0.584.004, FRC0584004
QFA-FRC584001,QFAFRC-584.001,FCC ID: QFA-FRC584001


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.

Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.

We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Price: $95.76
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.008 Proflame G-Fire Series Remote Transmitter is a RF frequency 4.5 Volts DC transmitter made by SIT Controls.

This 0.584.008 Transmitter is designed to be used with the SIT Controls 1.584.202-01 Remote Receiver.

This Proflame G-Fire Remote Transmitter can be crossed referenced to the 1584008, 1.584.008 and the 120066-01 part numbers.

This Remote Transmitter was used on many different model fireplaces including units made by DESA International, FMI, Sure Heat and others.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $57.33
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.021 Proflame GT Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.021 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTM 0.584.021 is designed to control the on/off main burner operation and provides on/off and Smart thermostatic control of the hearth appliance.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $108.16
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.022 Proflame GTM Series Transmitter is the remote transmitter that was used for the control on the flame height and temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The Proflame GTM Remote 0.584.022 is also the Regency Receiver part numbers 910-572, 946-701 and the Desa, FMI part number 121129-01.
The 0.584.022 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTM 0.584.022 is designed to control the on/off main burner operation, its flame levels, and provides on/off and Smart thermostatic control of the hearth appliance.

The Proflame GTM 0.584.022 is specifically developed to be used together with the 829 NOVA mV multi functional gas control or with the 820 NOVA mV converted with the step motor modulating kit.

The Proflame GTM 0.584.022 is a modular remote control system that directs the many functions of today's hearth appliances.

In its basic form, it is configured to control the on/off operation of the main burner and to provide thermostatic control of the appliance.
Comfort control is advanced by the Smart thermostat feature which automatically modulates flame height optimizing temperature management and room ambiance.
We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds! These items comes with a 90 day warranty for exchange only. Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted. We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $104.90
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.023 Proflame GTMF Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.023 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMF 0.584.023 is designed to control the on/off main burner operation, flame height modulation and provides on/off and Smart thermostatic control of the hearth appliance.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Price: $124.90
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.024 Proflame GTS Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.024 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTS 0.584.024 is designed to control the on/off main burner operation, split flow control and provides on/off and Smart thermostatic control of the hearth appliance.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.584.025 Proflame GTMS Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.025 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMS 0.584.025 is designed to control the on/off main burner operation, flame height modulation, split flow control and provides on/off and Smart thermostatic control of the hearth appliance.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Price: $189.74
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.026 Proflame GTMFS Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.026 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMFS 0.584.026 is designed to control the on/off main burner operation, flame height modulation, fan speed control, split flow control and provides on/off and Smart thermostatic control of the hearth appliance.

The Proflame GTMFS 0.584.027 is the replacement remote for the 0.584.026 and 0.584.028 in plain black.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Price: $153.65
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.584.027 Proflame GTMFS Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.027 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMFS 0.584.027 is designed to control the on/off main burner operation, flame height modulation, fan speed control, split flow control and provides on/off and Smart thermostatic control of the hearth appliance.

The Proflame GTMFS 0.584.027 is the replacement remote for the 0.584.026 and 0.584.028 in plain black.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Price: $153.65
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.028 Proflame GTMFS Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.028 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMFS 0.584.028 is designed to control the on/off main burner operation, flame height modulation, fan speed control, split flow control and provides on/off and Smart thermostatic control of the hearth appliance.

The Proflame GTMFS 0.584.027 is the replacement remote for the 0.584.026 and 0.584.028 in plain black.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are “NOT RETURNABLE” for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The SIT Controls 0.584.121 Proflame GTMF Fan Control Module is a 120 Vac / 60Hz - 8A max FCM module.

The 0.584.121 / 0584121 FCM fan Control Module was used with the SIT Controls GTMF Series remote and receiver set.

The 0.584.121 FCM has the following specifications:

In: 120Vac/60Hz - 8A max
Out: 120Vac/60Hz - 8A max
Fan: 120Vac/60Hz - 8A max
Aux: 120Vac/60Hz - 8A max


This 0.584.121 FCM supplies power to following 3 ports:
1 120Vac/60Hz - 8A max Output port
1 120Vac/60Hz - 8A max Fan port
1 120Vac/60Hz - 8A max Auc port

This 0.584.121 / 0584121 must only be used with the SIT Controls GTMF system
  • Price: $140.00
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The SIT remote receiver module 0.584.201 has been discontinued and must be upgraded to the new SIT remote receiver control module part number 0.584.211-01

This new series remote receiver control module will not hook up to the old stepper motor wire harness and must be replaced with a new stepper motor.

Please note a new Stepper Motor will need to be order and installed by a certified installer.
The new 0.584.211-01 will not work with the old style stepper motor and Red 6 Pin ribbon wire harness.

DIP SWITCH SETTINGS STOCK:
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section. Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The SIT remote receiver module 0.584.201 has been discontinued and must be upgraded to the new SIT remote receiver control module part number 0.584.211-01

Please note a new Stepper Motor will need to be order and installed by a certified installer.
The new 0.584.211-01 will not work with the old style stepper motor and Red 6 Pin ribbon wire harness.

  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

The 0.584.202 Sit Controls Receiver Kit is the G-Fire Series Remote Kit.

This 0.584.202 G-Fire System is an On / Off system control only and does not thermostatically regulate temperature.

The 0.584.202 Receiver kit was used on various models of fireplaces by several manufactures and is the replacement part for the following part numbers.

1.584.202-01
1584202 01
584.202-1
1584202-01
158420201
584-202-01
  • Price: $64.90
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The Proflame Receiver Model 0.584.211-00 has now been replaced with the new Proflame Receiver Model 0.584.211-01

The new receiver comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

The Default setting for the 0.584.211-00 as as follows:

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section.

Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

This SIT Controls Model .0584.211-01 Proflame Receiver is the latest model receiver kit and replaces the older 0.584.211-00 Proflame receiver kit.

The new 0.584.211-01 Proflame Receiver kit comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:

Press the Minus button - 10 times...you are now in the frequency section.

Now use your up and down keys to get frequency 005

NOTE: The + Key will change your temp from C to F...pay attention.

Press Minus- again to exit and your remote is now set.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

 

  • Price: $117.90
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.221 Receiver is an auto programming model receiver for the GT and GTM series remotes used by many different fireplace manufactures.

This 0.584.221 Receiver was used on many of the fireplace and gas logs systems used by DESA International. These fireplaces were sold under the Vanguard, FMI, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.221 Proflame receiver and install new alkaline batteries.

The first thing to check here before replacing either the receiver or the transmitter is going to be the battery connections in the receiver.
The receiver is exposed to much more heat and will typically be the item that is replaced most often due to the heat, but the connections still are the first thing to check.


Remove the receiver box from the fireplace.
Carefully remove the battery door cover and batteries from the receiver, this battery cover door is not a part that can be ordered separately so be careful when servicing the receiver or changing the batteries.
Turn the cover over and remove the 2 small phillips screws in the back of the receiver.
Now slide the circuit board / battery contact housing out from inside of the receiver.
Inspect the circuit board for corrosion, if you find corrosion on the circuit board you may need to replace the receiver with the new 0.584.521 Remote Kit.
Inspect the battery contacts and springs, clean the positive battery contacts and then stretch the negative battery contact springs in the battery contact housing.
Also clean the positive battery contacts on the battery door that was removed and also stretch the negative battery contact springs on the door.
Clean the receiver housing of any debris, dirt, dust or corrosion before reassembly.

Now reassemble the receiver in the reverse order of disassembly and install new alkaline batteries.
After installing the batteries you should hear 1 beep telling you the receiver has power and is ready to be programmed.
Push the program button one time and you should hear the 3 short beep telling you the receiver is now ready to accept a new code from the remote transmitter.
Now push the On/Off button of your remote transmitter and you should hear 4 beeps from the receiver telling you the receiver and the remote are now paired with the same RF code and ready to be used.

If after you have performed this procedure you are still not able to control your gas log set remotely then the most common failure part is the receiver.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

This 0.584.223 Receiver was used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.223 Proflame receiver and install new DURACELL alkaline batteries.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Availability: This items is currently not in stock.
    Typical lead time for this item is 14 days.
    Special Order and Back Ordered items not pictured may take additional time.
    Please call email for specific details

Featured Items Brought to you by Allparts Equipment and Accessories

 

he 0.584.521 Receiver kit and the 0584521 Receiver kit contains the 0.584.221 Sit Proflame receiver, batteries, receiver cover and instructions.
The 0.584.521 Receiver kit is an auto programming model receiver for the GT and GTM series remotes used by many different fireplace manufactures.

This 0.584.521 Receiver kit was used on many of the fireplace and gas logs systems used by DESA International. These fireplaces were sold under the Vanguard, FMI, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.221 Proflame receiver and install new alkaline batteries.

The first thing to check here before replacing either the receiver or the transmitter is going to be the battery connections in the receiver.
The receiver is exposed to much more heat and will typically be the item that is replaced most often due to the heat, but the connections still are the first thing to check.

 

Remove the receiver box from the fireplace.
Carefully remove the battery door cover and batteries from the receiver, this battery cover door is not a part that can be ordered separately so be careful when servicing the receiver or changing the batteries.
Turn the cover over and remove the 2 small phillips screws in the back of the receiver.
Now slide the circuit board / battery contact housing out from inside of the receiver.
Inspect the circuit board for corrosion, if you find corrosion on the circuit board you may need to replace the receiver with the new 0.584.521 Remote Kit.
Inspect the battery contacts and springs, clean the positive battery contacts and then stretch the negative battery contact springs in the battery contact housing.
Also clean the positive battery contacts on the battery door that was removed and also stretch the negative battery contact springs on the door.
Clean the receiver housing of any debris, dirt, dust or corrosion before reassembly.

Now reassemble the receiver in the reverse order of disassembly and install new alkaline batteries.
After installing the batteries you should hear 1 beep telling you the receiver has power and is ready to be programmed.
Push the program button one time and you should hear the 3 short beep telling you the receiver is now ready to accept a new code from the remote transmitter.
Now push the On/Off button of your remote transmitter and you should hear 4 beeps from the receiver telling you the receiver and the remote are now paired with the same RF code and ready to be used.

If after you have performed this procedure you are still not able to control your gas log set remotely then the most common failure part is the receiver.


We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $90.50
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.523 Proflame Receiver Kit comes as a replacement kit assembly.

This 0.584.523 kit replaces the 0.584.223 receiver assembly.

This 0.584.523 Receiver kit was used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.223 Proflame receiver and install new alkaline batteries.

The first thing to check here before replacing either the receiver or the transmitter is going to be the battery connections in the receiver.
The receiver is exposed to much more heat and will typically be the item that is replaced most often due to the heat, but the connections still are the first thing to check.
Remove the receiver box from the fireplace.
Carefully remove the battery door cover and batteries from the receiver, this battery cover door is not a part that can be ordered separately so be careful when servicing the receiver or changing the batteries.
Turn the cover over and remove the 2 small Phillips screws in the back of the receiver.
Now slide the circuit board / battery contact housing out from inside of the receiver.
Inspect the circuit board for corrosion, if you find corrosion on the circuit board you may need to replace the receiver with the new 0.584.523 Remote Kit.
Inspect the battery contacts and springs, clean the positive battery contacts and then stretch the negative battery contact springs in the battery contact housing.
Also clean the positive battery contacts on the battery door that was removed and also stretch the negative battery contact springs on the door.
Clean the receiver housing of any debris, dirt, dust or corrosion before reassembly.
Now reassemble the receiver in the reverse order of disassembly and install new alkaline batteries.
After installing the batteries you should hear 1 beep telling you the receiver has power and is ready to be programmed.
Push the program button one time and you should hear the 3 short beep telling you the receiver is now ready to accept a new code from the remote transmitter.
Now push the On/Off button of your remote transmitter and you should hear 4 beeps from the receiver telling you the receiver and the remote are now paired with the same RF code and ready to be used.
If after you have performed this procedure you are still not able to control your gas log set remotely then the most common failure part is the receiver.



We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!
These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $99.60
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

The 0.584.524 Proflame Receiver Kit comes as a replacement kit assembly.

This 0.584.524 kit replaces the 0.584.224 receiver assembly.

This 0.584.524 Receiver kit was used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.223 Proflame receiver and install new alkaline batteries.

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds!

These items comes with a 90 day warranty for exchange only.

Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.
  • Price: $90.50
  • Availability: available
    Orders received before 1PM Monday to Friday will be shipped on same day

Items 1-30 of 141494