>TK55 - KEROSENE-DEISAL PORTABLE FORCED AIR HEAT

0.199.744 - PILOT ASSEMBLY SIT CONTROLS

The 0.199.744 Pilot Assembly is a Tri Directional replacement Propane LPG Gas pilot assembly for various gas operated appliances.

The 0.199.744, 0199744 Pilot Assembly is manufacture by SIT Controls and has been used by many different manufactures for use on Fireplaces, Gas Logs, Vented Gas Log Sets,Direct vent Gas Stoves, Vent Free Fireplace and Gas Stoves and other similar gas products and gas appliances.

Some of the manufactures that currently use the Sit Control gas con
More...

0.240.002 - THERMO-GENERATOR WITH 23 INCH WIRE OUTPUT RATING 400-750Mv

The 0.240.002 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source.

This 0.240.002 Thermopile Generator Features:
Push-in clip, split nut, and adapter assembly for easy pilot burner installation.
Spade or quick-connect terminals available for millivolt gas control connections.
Male nut connector for Pilotstat® safety control power units.

0.240.003 - THERMO-GENERATOR WITH 35 INCH WIRE OUTPUT RATING 400-750Mv

The 0.240.003 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source. This 0.240.003 Thermopile Generator Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections. Male nut connector for Pilotstat® safety control power units.

0.240.005 - HERMO-GENERATOR WITH 42 INCH WIRE OUTPUT RATING 400-750Mv

The 0.240.005 Sit Thermopile Generator generates sufficient power to operate an automatic millivolt gas control system, independent of any outside power source.

This 0.240.005 Thermopile Generator Features: Push-in clip, split nut, and adapter assembly for easy pilot burner installation. Spade or quick-connect terminals available for millivolt gas control connections.
Male nut connector for Pilotstat® safety control power units.

0.290.216 - THERMOCOUPLE 24 INCH WITH FITTING NUTS

The 0.290.216 Thermocouple is the OEM 24 inch thermocouple used in the SIT Control Pilot ODS assembly.
|
The 0.290.216 Thermocouple has been used on fireplaces and gas log set that were made by DESA, FMI, Regency,Comfort Glow, Empire and many other brands of fireplaces and direct vent gas log sets.

0.290.218 - THERMOCOUPLE 32 INCH WITH FITTING NUTS

The 0.290.218 Thermocouple is the OEM 32 inch thermocouple used in the SIT Control Pilot ODS assembly.
|
The 0.290.218 Thermocouple has been used on fireplaces and gas log set that were made by DESA, FMI, Regency,Comfort Glow, Empire and many other brands of fireplaces and direct vent gas log sets.

0.584.004 - REMOTE TRANSMITTER, DIGITAL DISPLAY 584 FOR USE WITH FIREPLACES AND GAS LOG SETS

The 0.584.004 Remote Transmitter Advanced remote control system for both direct vent and vent-free fireplace, gas logs and other hearth products.
The 0.584.004 Remote Transmitter is designed to work together with the 820 NOVA mV multi functional control gas valve and the stepping motor conversion kit as well as the 829 NOVA mV Gas Control Valve.

This 0.584.004 will replace the following transmitters by SIT Controls
FRC 0.584.004, FRC-0.584.004, FRC0584004
QFA-FRC58
More...

0.584.008 - G-FIRE REMOTE CONTROL TRANSMITTER

The 0.584.008 Proflame G-Fire Series Remote Transmitter is a RF frequency 4.5 Volts DC transmitter made by SIT Controls.

This 0.584.008 Transmitter is designed to be used with the SIT Controls 1.584.202-01 Remote Receiver.

This Proflame G-Fire Remote Transmitter can be crossed referenced to the 1584008, 1.584.008 and the 120066-01 part numbers.

This Remote Transmitter was used on many different model fireplaces including units made by DESA International, FMI, Sur
More...

0.584.021 - TRANSMITTER GT SERIES REMOTE FOR FIREPLACE, GAS LOGS AND OTHER APPLIANCES

The 0.584.021 Proflame GT Series Transmitter is the remote transmitter that was used for the control room temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The 0.584.021 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTM 0.584.021 is designed to control the on/off main burner operation and provides on/o
More...

0.584.022 - TRANSMITTER PROFLAME GTM SERIES REMOTE FITS DESA, FMI, RECENCY, EMPIRE

The 0.584.022 Proflame GTM Series Transmitter is the remote transmitter that was used for the control on the flame height and temperature on many gas log sets including fireplaces made by DESA, Regency Fireplaces, Comfort Glow, Empire, FMI, Design Dynamics, Vanguard and several other fireplaces.

The Proflame GTM Remote 0.584.022 is also the Regency Receiver part numbers 910-572, 946-701 and the Desa, FMI part number 121129-01.
The 0.584.022 Transmitter requires 4.5 DC Volts,3 AAA
More...

0.584.023 - TRANSMITTER GTFM PROFLAME SERIES SIT CONTROLS 0.584.023 AND 584.023

The 0.584.023 Proflame GTMF Series Transmitter replaces the 584.023 transmitter that was used for the control on the flame height, proflame electronic valve and temperature on many gas log sets including fireplaces made by DESA, Comfort Glow, Empire, FMI,Regency, Design Dynamics, Vanguard and several other fireplaces

The 0.584.023 Transmitter requires 4.5 DC Volts,3 AAA batteries and has a radio frequency of 315 MHz

The Proflame GTMF 0.584.023 is designed to control the on/
More...

0.584.121 - FAN CONTROL MODULE FCM SIT CONTROLS GTFM SERIES REMOTE REQURED FOR OPERATION

The SIT Controls 0.584.121 Proflame GTMF Fan Control Module is a 120 Vac / 60Hz - 8A max FCM module.

The 0.584.121 / 0584121 FCM fan Control Module was used with the SIT Controls GTMF Series remote and receiver set.

The 0.584.121 FCM has the following specifications:

In: 120Vac/60Hz - 8A max
Out: 120Vac/60Hz - 8A max
Fan: 120Vac/60Hz - 8A max
Aux: 120Vac/60Hz - 8A max


This 0.584.121 FCM supplies power to following 3 ports:
1 1
More...

0.584.201 - RECEIVER MODULE 6 PIN RED CONNECTOR

The SIT remote receiver module 0.584.201has been discontinued and must be upgraded to the new SIT remote receiver control module part number 0.584.211-01 This new series remote receiver control module will not hook up to the old stepper motor wire harness and must be replaced with a new stepper motor.

0.584.201-01 - RECEIVER MODULE 6 PIN RED CONNECTOR

The SIT remote receiver module 0.584.201 has been discontinued and must be upgraded to the new SIT remote receiver control module part number 0.584.211-01

This new series remote receiver control module will not hook up to the old stepper motor wire harness and must be replaced with a new stepper motor.

0.584.202 - G-FIRE RECEIVER KIT SIT CONTROLS

The 0.584.202 Sit Controls Receiver Kit is the G-Fire Series Remote Kit.

This 0.584.202 G-Fire System is an On / Off system control only and does not thermostatically regulate temperature.

The 0.584.202 Receiver kit was used on various models of fireplaces by several manufactures and is the replacement part for the following part numbers.

1.584.202-01
1584202 01
584.202-1
1584202-01
158420201
584-202-01

0.584.211-00 - SIT PROFLAME PLUS SERIES RECEIVER 4 PIN STEPPER MOTOR CONNECTOR

The Proflame Receiver Model 0.584.211-00 has now been replaced with the new Proflame Receiver MOdel 0.584.211-01

The new receiver comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

The Default setting for the 0.584.211-00 as as follows:

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:
More...

0.584.211-01 - RECEIVER PROFLAME PLUS SERIES 0.584.211 USES 4 PIN BLACK CONNECTOR

This SIT Controls Model .0584.211-01 Proflame Receiver is the latest model receiver kit and replaces the older 0.584.211-00 Proflame receiver kit.

The new 0.584.211-01 Proflame Receiver kit comes with the 2 wire harness and has a 4 pronged receiver and a 8 position dip switch.

DIP SWITCH SETTINGS STOCK
(1) UP (2) DOWN (3) UP (4) DOWN (5) DOWN (6) DOWN (7) DOWN (8) DOWN

Remote on Frequency 5

Turn Remote on then scroll down to the Timer:


More...

0.584.221 - RECEIVER PROFLAME SIT CONTROL COMES IN 0.584.521 KIT

The 0.584.221 Receiver is an auto programming model receiver for the GT and GTM series remotes used by many different fireplace manufactures.

This 0.584.221 Receiver was used on many of the fireplace and gas logs systems used by DESA International. These fireplaces were sold under the Vanguard, FMI, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.221 Proflame receiver
More...

0.584.223 - RECEIVER WITH SPLITFLOW CONTROL USED WITH REGENGY, DESA, FMI AND OTHERS

This 0.584.223 Receiver was used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sure to inspect the contacts and springs inside of the 0.584.223 Proflame receiver and install new DURACELL alkaline batteries.

We are sorry but REMOTE
More...

0.584.521 - PROFLAME RECEIVER KIT GTM SERIES AUTO PROGRAMMING 0.584.521 KIT W/ 0.584.221 R

The 0.584.521 Receiver kit contains the 0.584.221 Sit Proflame receiver, batteries, receiver cover and instructions.
The 0.584.521 Receiver kit is an auto programming model receiver for the GT and GTM series remotes used by many different fireplace manufactures.

This 0.584.521 Receiver kit was used on many of the fireplace and gas logs systems used by DESA International. These fireplaces were sold under the Vanguard, FMI, Comfort Glow as well as many other private labels.
More...

0.584.523 - RECEIVER KIT WITH SPLITFLOW CONTROL SIT USED WITH REGENCY, DESA, FMI AND OTHERS

The 0.584.523 Proflame Receiver Kit comes as a replacement kit assembly.

This 0.584.523 kit replaces the 0.584.223 receiver assembly.

This 0.584.523 Receiver kit was used on many of the fireplace and gas logs systems used by DESA International, FMI Fireplace manufactures Inc, Regency Fireplace Products. These fireplaces were sold under the Vanguard, Regency Horizon, Comfort Glow as well as many other private labels.

Before replacing your current receiver make sur
More...

0.584.525 - PROFLAME TRANSMITTER GTSM SERIES SIT CONTROLS

We are sorry but REMOTE TRANSMITTERS and REMOTE RECEIVERS are "NOT RETURNABLE" for refunds! These items comes with a 90 day warranty for exchange only.
Please look at all pictures carefully and study your manual before you purchase this item because no returns for refunds will be accepted.
We do offer free testing on most Remote Transmitters and Remote Receivers for customer who choose to send these items in for testing.

0.584.801 - COVER KIT, PROFLAME RECEIVER THIS IS NOT THE BATTERY DOOR

0.584.901 - PROFLAME WIRE HARNESS GT & GTM SERIES

0.584.901 Proflame Wire Harness for the GT & GTM series remotes to the SIT Millivolt 820 Series gas control valve.

0.584.903 - PROFLAME WIRE HARNESS FIT GTMFS SERIES

The 0.584.903 Wire Harness is a 11 wire harness used with the Sit Controls GTMFS Series remote control units.

The 0.584.903 Wire Harness will have the following connections:



TPTH = Thermopile Thermostat Connection
TH = Thermostat Connection
MOTOR = Stepper Motor Connection
FCM COM = Fan Control Module
SPLITFLOW = Splitflow gas Control Valve

Cross Reference to: 0584903.0.584-903, 0 584 903, 0-584-903

0.820.637 - Gas Valve NG Hi-Lo Manual Sit 820 Series

0.820.652 - VALVE, GAS CONTROL HI-LO MANUAL SIT 820 SERIES REMOTE READY MILLIVOLT

The 0.820.652 is the Natural Gas Remote Ready Gas Control Valve for many gas logs sets and fireplaces produced by Desa International, Majestic, Empire, Comfort Glow, FMI, Vanguard and others.

The 0.820.652 is a SIT Controls Series 820 Nova Millivolt gas valve.
This 0.820.652 Gas Valve is a Manual Gas Control valve for use with Natural Gas NG and is remote ready.

The 0820652 Sit Control Valve is SIT Controls Model Number 0.820.652
The Sit 0820652 Control Vlave will
More...

0.915.075 - ELECTRODE AND CABLE WITH CERAMIC 24 INCH LENGHT FIT SIT PILOTS

The 0.915.075 Electrode and Cable with Ceramic is the 24 inch igniter cable with ends for the SIT Controls Pilot Assembly.

0.974.144 - ELECTRODE NUT